Shipping Automotives from Lazaro Cardenas to Phoenix via Ground Freight

For moisture-sensitive car parts, choose inner poly bags with desiccant around each component, then place them in Sturdy cartons with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Dry Storage Only”. For export or long-duration transit, evaluate adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You are allowed to ship car tires with boxed automotive parts, but They should be physically separated and properly secured. We recommend palletizing boxed car parts and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled vehicle parts such as fuel system components, shock absorbers, or oil coolers can require dangerous goods documentation, depending on the type and quantity of fluid. You should Check whether the product is classified as dangerous goods under relevant transport regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value vehicle components such as engines, transmissions, ECUs, and safety modules are typically shipped with declared value coverage. Carrier default liability Is often limited and may not cover the full replacement cost of specialized Automotive parts. Freight experts recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed vehicle components pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and car tires above. Use Corner boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive vehicle parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

Shipments of auto parts require a commercial invoice, bill of lading, and any necessary customs declarations. Additionally, specific import permits may be needed depending on the type of auto parts being shipped.

Yes, all auto parts must comply with U.S. customs regulations, including adherence to safety and environmental standards. It is essential to ensure that the parts meet the relevant regulations, such as the National Highway Traffic Safety Administration (NHTSA) requirements, before crossing the border.

Our team manages global ocean freight with worldwide routing, top-tier carriers, full container loads (FCL), less-than-container loads (LCL), and port-to-door service including customs and final-mile delivery.

For air cargo, we provide live alerts and 24/7 tracking for full shipment visibility.

Our brokerage team provides import and export clearance to keep your shipments moving and compliant.