Shipping Vehicle Tires from Lazaro Cardenas to Savannah via Ocean Freight

For moisture-sensitive Auto parts, Use inner poly bags with desiccant around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, Consider adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You Can ship Tires with boxed automotive parts, but they must be physically separated and properly secured. We recommend palletizing boxed auto components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers May require dangerous goods documentation, depending on the type and quantity of fluid. Exporters should Check whether the product is classified as dangerous goods under IMDG and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules Are best shipped with declared value coverage. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized Automotive parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed Automotive pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and car tires above. Use angle boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

Required documentation includes a bill of lading, commercial invoice, packing list, and any necessary customs declarations to comply with U.S. import regulations.

Yes, auto parts should be securely packaged to prevent damage during transit, and any hazardous materials must be properly labeled and documented in accordance with international shipping regulations.

Yes, they are. You can see our certifications and compliance credentials, including FMC license, DOT number, and C-TPAT partnership, in the Certifications section of our FAQs.

If something looks off, our team responds quickly, and SAMMIE also flags duplicates or anomalies before invoices are sent, with your dedicated Client Success Officer available for clarification.

The DNA Expert Date is the most accurate dynamic forecasts in the industry, using historical data, live vessel telemetry, weather, and port congestion overlays to go beyond basic status updates.