Shipping Car Tires from Long Beach to Calgary via Ground Freight

For moisture-sensitive Auto parts, select inner sealed pouches around each component, then place them in Sturdy cartons with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You Can ship vehicle tires with boxed car parts, but They should be physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive Automotive parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers often require special handling notes, depending on the type and quantity of fluid. You should Check whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules should be shipped with enhanced transit insurance. Carrier default liability Is often limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed Automotive pallet loads, position the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use Corner boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

When shipping auto parts from Long Beach to Calgary, required documentation typically includes a commercial invoice, a bill of lading, and any necessary customs declarations. Additionally, compliance with the United States-Mexico-Canada Agreement (USMCA) may be necessary to ensure tariff benefits.

Yes, seasonal considerations may affect the transport of auto parts from Long Beach to Calgary. Winter weather can lead to hazardous driving conditions, while summer heat may impact the integrity of certain automotive components. It is advisable to monitor weather conditions and plan for potential delays during extreme weather events.

SAMMIE improves visibility by combining live carrier data, independent port tracking, an AI rules engine, and human verification to provide real-time visibility, predictive alerts, and exception management.

It means every move we make by land, air, or sea is guided by purpose, careful planning, decisive action, and precise, attentive execution.

You can hear more by listening to podcast episodes such as “David Rosendorf – Turning Setbacks Into Success” on The Rich Equation Podcast and “We Talk with Shipping & Logistics Magician David Rosendorf of DNA Supply Chain Solutions” on The Launch Pad Podcast.