Shipping Vehicle Tires from Long Beach to Lazaro Cardenas via Ground Freight

For moisture-sensitive automotive parts, select inner Moisture-barrier bags around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Dry Storage Only”. For export or long-duration transit, Consider adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You may ship vehicle tires with boxed Auto parts, but it is best that they are physically separated and properly secured. We recommend palletizing boxed car parts and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers often require Hazardous materials declarations, depending on the type and quantity of fluid. Shippers should Check whether the product is classified as dangerous goods under relevant transport regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules should be shipped with Full-value cargo insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized Automotive parts. Freight experts recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed auto parts pallet loads, position the heaviest metal components at the bottom, with lighter boxes and Tires above. Use edge protectors, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive vehicle parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

Shipping auto parts from Long Beach to Lazaro Cardenas requires a commercial invoice, a bill of lading, and any necessary export permits. Additionally, shippers must comply with Mexican customs regulations, which may include a certificate of origin or specific import permits for automotive parts.

Yes, when transporting auto parts over the 2372 km route from Long Beach to Lazaro Cardenas, it is important to ensure that the parts are securely packaged to prevent damage. Fragile components should be cushioned, and heavy items should be properly secured to avoid shifting during transit.

No, DNA uses in-house customs brokerage with automation to reduce errors and accelerate clearance, rather than outsourcing to third-party brokers with outdated, manual documentation processes.

Our “One Test Run Challenge” is an invitation to move a single shipment with DNA so we can demonstrate our visibility, reliability, and partnership, showing how our SAMMIE platform and proactive team perform in a real-world test.

Yes, it’s possible. You don’t have to move your whole operation; you can give us one shipment in any mode or lane as a “test run,” and we’ll handle it end-to-end with precision, transparency, and care.