Shipping Car Parts from Long Beach to Manaus via Ocean Freight

For moisture-sensitive automotive parts, Use inner sealed pouches around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, assess adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You may ship Tires with boxed car parts, but it is best that they are physically separated and properly secured. Most carriers recommend palletizing boxed Vehicle components and then stacking or racking vehicle tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers May require special handling notes, depending on the type and quantity of fluid. Shippers should review whether the product is classified as dangerous goods under DOT and IATA regulations and prepare the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules Are best shipped with enhanced transit insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized auto parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure will be processed efficiently.

To reduce damage in mixed auto parts pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use edge protectors, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and visibly tag any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

Shipping auto parts from Long Beach to Manaus requires specific documentation, including a commercial invoice, packing list, bill of lading, and any necessary export permits. Additionally, customs clearance in Brazil will require the import declaration and may involve specific certifications for automotive parts.

Yes, regulatory requirements include compliance with both U.S. export regulations and Brazilian import regulations. Auto parts must meet Brazilian ANVISA regulations if they are considered medical or safety-related, and importers must be registered with the Receita Federal do Brasil. Specific automotive standards may also apply depending on the type of parts being shipped.

Yes, we do provide coverage for urgent cases, which are escalated and managed with after-hours monitoring when needed, especially for high-volume or time-critical shipments.

DNA adheres to industry best practices and relevant data protection regulations for international shipping and technology platforms, including GDPR and CCPA where applicable.

SAMMIE is different because its proprietary ecosystem of standardized shipping data that is meticulously cleaned, weighted, and validated from trusted third-party sources and DNA Supply Chain Solutions’ own operational history, enabling AI tools that think ahead instead of just reporting past events.