Shipping Auto Parts from Los Angeles to Altamira via Ocean Freight

For moisture-sensitive car parts, select inner Moisture-barrier bags around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with strong packing tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, evaluate adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You are allowed to ship vehicle tires with boxed Auto parts, but it is best that they are physically separated and properly secured. Logistics providers commonly recommend palletizing boxed Vehicle components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive Automotive parts, as this can cause crushing or punctures during transit.

Fluid-filled vehicle parts such as fuel system components, shock absorbers, or oil coolers often require Hazardous materials declarations, depending on the type and quantity of fluid. Shippers should verify whether the product is classified as dangerous goods under DOT and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value vehicle components such as engines, transmissions, ECUs, and safety modules should be shipped with Full-value cargo insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized vehicle parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed vehicle components pallet loads, position the heaviest metal components at the bottom, with lighter boxes and Tires above. Use edge protectors, shrink wrap and bands to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

Documentation typically includes a commercial invoice, packing list, bill of lading, and any necessary export permits. Additionally, customs declarations must comply with both U.S. and Mexican regulations, including proper Harmonized System (HS) codes for automotive parts.

Yes, auto parts should be securely packaged to prevent damage during transit. It is advisable to use moisture-resistant materials and ensure that heavier parts are properly braced to avoid shifting. Additionally, compliance with the International Maritime Organization (IMO) regulations for hazardous materials may be necessary for certain components.

We deliver a DNA Expert ETA, which is an arrival estimate that is more accurate and proactive than carrier estimates, powered by SAMMIE’s data and human verification.

For customers, it means that whether you are our smallest shipper or largest enterprise, you receive the same honesty, responsiveness, and care that define DNA Supply Chain Solutions.

A single shipment is enough because we believe that with one shipment we can prove our visibility, reliability, and partnership approach in a tangible way.