Shipping Car Tires from Los Angeles to Buenaventura via Ocean Freight

For moisture-sensitive automotive parts, Use inner poly bags with desiccant around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with strong packing tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, evaluate adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You may ship Tires with boxed automotive parts, but they must be physically separated and properly secured. Logistics providers commonly recommend palletizing boxed Vehicle components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers May require dangerous goods documentation, depending on the type and quantity of fluid. Exporters should verify whether the product is classified as dangerous goods under DOT and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules Are best shipped with declared value coverage. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized vehicle parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed auto parts pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and car tires above. Use angle boards, shrink wrap and bands to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

Auto parts should be securely packaged to prevent damage during transit. It's important to ensure that all items are properly labeled and documented to facilitate customs clearance. Additionally, due to potential exposure to moisture during ocean freight, using corrosion-resistant materials for packaging is advisable.

Shipments of auto parts to Colombia require compliance with Colombian customs regulations, including proper documentation such as commercial invoices, packing lists, and certificates of origin. Import duties and taxes may also apply, and it is essential to ensure that the auto parts meet any relevant safety and environmental standards set by Colombian authorities.

Prospective clients can take the “One Test Run Challenge” by giving us a single shipment, which we use to demonstrate what visibility, reliability, and real partnership feel like, with a dedicated page available to get started.

Our SAMMIE platform is provided with every ocean, air, land, and customs service at no extra cost.

DNA uses SAMMIE’s AI-driven rate and route optimization to recommend optimal carriers and lanes based on current conditions and prices.