Shipping Car Parts from Los Angeles to Charlotte via Ocean Freight

For moisture-sensitive automotive parts, select inner sealed pouches around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You may ship vehicle tires with boxed car parts, but it is best that they are physically separated and properly secured. Most carriers recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive Automotive parts, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers often require special handling notes, depending on the type and quantity of fluid. Shippers should review whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules should be shipped with enhanced transit insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized auto parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed auto parts pallet loads, position the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use edge protectors, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

When shipping auto parts via ocean, it is important to ensure that the parts are properly packaged to prevent damage during transit. Additionally, specific components may require special handling, such as those sensitive to moisture or temperature changes.

The shipment of auto parts from Los Angeles to Charlotte requires standard shipping documentation, including a bill of lading, commercial invoice, and any necessary export declarations. Since both locations are within the United States, customs documentation is generally simplified, but ensure compliance with any federal regulations pertaining to automotive components.

The Actionable Shipment Intelligence feature surface trends, spot delays, and enable you to run exportable reports, while the system learns from every shipment to improve the next one.

The platform improves your client service by allowing you to quickly and efficiently update your customers on their shipments and providing the visibility and data needed to meet the customer service your clients expect.

To explore additional services, you can visit the section to explore DNA Supply Chain’s complete logistics services.