Shipping Vehicle Components from Manila to Nashville via Ocean Freight

For moisture-sensitive automotive parts, Use inner sealed pouches around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, Consider adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You may ship Tires with boxed car parts, but they must be physically separated and properly secured. Most carriers recommend palletizing boxed auto components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers May require special handling notes, depending on the type and quantity of fluid. Exporters should review whether the product is classified as dangerous goods under IMDG and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules Are best shipped with enhanced transit insurance. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized auto parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed auto parts pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use angle boards, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

Auto parts should be properly packaged to prevent damage during ocean transport. It is important to ensure that all parts are secured and labeled correctly, as well as to consider weight distribution in containers to comply with maritime safety regulations.

Shipments of auto parts must comply with U.S. Customs and Border Protection regulations, including proper documentation such as a bill of lading, commercial invoice, and any necessary import permits. Additionally, compliance with the U.S. Environmental Protection Agency (EPA) and Department of Transportation (DOT) standards for vehicle parts is required.

Yes, DNA Supply Chain is fully licensed (FMC #019344), bonded, insured, and C-TPAT compliant, with a digital-first customs process that uses automation to reduce delays, cut risk, and ensure regulatory compliance.

Yes, customers get a dedicated Client Success Officer who oversees your freight, solves problems proactively, and keeps you informed throughout each shipment.

DNA states this because a single shipment is enough for shippers to experience our AI-powered visibility, proactive issue management, and partner-level support, and to see how we differ from larger, less responsive forwarders.