Shipping Automotives from Manzanillo to Lazaro Cardenas via Ground Freight

For moisture-sensitive automotive parts, choose inner poly bags with desiccant around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with strong packing tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, assess adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You may ship car tires with boxed automotive parts, but it is best that they are physically separated and properly secured. Logistics providers commonly recommend palletizing boxed auto components and then stacking or racking vehicle tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers can require dangerous goods documentation, depending on the type and quantity of fluid. Shippers should verify whether the product is classified as dangerous goods under IMDG and IATA regulations and prepare the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules are typically shipped with declared value coverage. Carrier default liability is usually limited and may not cover the full replacement cost of specialized vehicle parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure will be processed efficiently.

To reduce damage in mixed auto parts pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and car tires above. Use edge protectors, shrink wrap and bands to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and visibly tag any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

Auto parts should be securely packaged to prevent damage during transit. It is important to ensure that they are properly labeled and documented to facilitate smooth handling at checkpoints along the 255 km route.

Yes, documentation such as invoices and packing lists may be required for the transportation of auto parts. Compliance with local regulations regarding vehicle and cargo inspections is also necessary to ensure adherence to safety standards during ground transport.

For us, it means we serve people, not just packages, focusing on face-to-face communication, thoughtful support, and long-term trust rather than one-off transactions.

Prospective clients can take the “One Test Run Challenge” by giving us a single shipment, which we use to demonstrate what visibility, reliability, and real partnership feel like, with a dedicated page available to get started.

Our SAMMIE platform is provided with every ocean, air, land, and customs service at no extra cost.