Shipping Vehicle Parts from Miami to New York via Ocean Freight

For moisture-sensitive Auto parts, Use inner poly bags with desiccant around each component, then place them in Sturdy cartons with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, evaluate adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You Can ship Tires with boxed automotive parts, but They should be physically separated and properly secured. Most carriers recommend palletizing boxed Vehicle components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive Automotive parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers May require dangerous goods documentation, depending on the type and quantity of fluid. You should review whether the product is classified as dangerous goods under DOT and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules Are best shipped with declared value coverage. Carrier default liability Is often limited and may not cover the full replacement cost of specialized auto parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed Automotive pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and car tires above. Use Corner boards, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

Auto parts should be securely packaged to prevent damage during transit. Consideration should be given to the weight and size of the parts, as well as the potential for corrosion, especially if the parts are exposed to saltwater during transport. Proper labeling and documentation are essential for tracking and customs clearance.

Shipping auto parts within the United States does not typically require customs clearance; however, proper documentation such as a bill of lading, packing list, and any relevant invoices must be provided to facilitate the shipping process and ensure compliance with regulations.

The “One Test Run Challenge” is an invitation to move a single shipment with DNA so we can demonstrate our visibility, reliability, and partnership, showing how our SAMMIE platform and proactive team perform in a real-world test.

Yes, you can. You don’t have to move your whole operation; you can give us one shipment in any mode or lane as a “test run,” and we’ll handle it end-to-end with precision, transparency, and care.

SAMMIE gives you a live look at shipments from port to final delivery with 18 milestone updates, satellite container tracking, and instant alerts, so your team always knows what’s moving, what’s delayed, and what’s next.