Shipping Auto Components from Miami to Yantian via Ocean Freight

For moisture-sensitive car parts, select inner sealed pouches around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You are allowed to ship vehicle tires with boxed car parts, but they must be physically separated and properly secured. Most carriers recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled vehicle parts such as fuel system components, shock absorbers, or oil coolers often require special handling notes, depending on the type and quantity of fluid. Exporters should review whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value vehicle components such as engines, transmissions, ECUs, and safety modules should be shipped with enhanced transit insurance. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized auto parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed vehicle components pallet loads, position the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use angle boards, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

When shipping auto parts via ocean freight, it is important to ensure that the parts are properly packaged to prevent damage during transit. Additionally, specific types of auto parts may require compliance with international shipping regulations, including proper labeling and documentation to facilitate customs clearance in both the United States and China.

Required documentation typically includes a commercial invoice, packing list, bill of lading, and any necessary export licenses. It is also important to prepare a customs declaration that accurately describes the auto parts being shipped, including their value and classification, to ensure compliance with customs regulations in both the United States and China.

In our operations, it means every move we make by land, air, or sea is guided by purpose, careful planning, decisive action, and precise, attentive execution.

Interested clients can hear his story by listening to podcast episodes such as “David Rosendorf – Turning Setbacks Into Success” on The Rich Equation Podcast and “We Talk with Shipping & Logistics Magician David Rosendorf of DNA Supply Chain Solutions” on The Launch Pad Podcast.

Our DNA Expert Date capability applies AI models with lane history, port trends, and weather data to deliver dynamic, accurate delivery timeframes.