Shipping Auto Components from Mombasa to Taipei via Ocean Freight

For moisture-sensitive automotive parts, choose inner Moisture-barrier bags around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You may ship car tires with boxed Auto parts, but it is best that they are physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers can require Hazardous materials declarations, depending on the type and quantity of fluid. Shippers should Check whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules are typically shipped with Full-value cargo insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed auto parts pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and Tires above. Use edge protectors, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

The required documentation typically includes a commercial invoice, packing list, bill of lading, and any necessary certificates of origin or compliance with Taiwanese regulations for automotive parts.

Yes, it is important to ensure that auto parts are securely packaged to prevent damage during transit. Additionally, compliance with international shipping standards and regulations for hazardous materials, if applicable, must be observed to avoid delays at customs.

DNA’s ETAs are AI-powered and based on real data, congestion, and vessel telemetry, whereas other forwarders often rely on static estimates copied from carrier schedules.

Clients describe SAMMIE’s data as extremely accurate and reliable, especially compared to the inaccurate or outdated data they used before adopting the platform.

Yes, an account is required. We walk you through onboarding to customize your experience and give you full access to the SAMMIE visibility platform.