Shipping Vehicle Tires from Monterrey to Guadalajara via Ground Freight

For moisture-sensitive automotive parts, Use inner sealed pouches around each component, then place them in Sturdy cartons with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Dry Storage Only”. For export or long-duration transit, Consider adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You may ship Tires with boxed car parts, but They should be physically separated and properly secured. We recommend palletizing boxed car parts and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers May require special handling notes, depending on the type and quantity of fluid. You should Check whether the product is classified as dangerous goods under relevant transport regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules Are best shipped with enhanced transit insurance. Carrier default liability Is often limited and may not cover the full replacement cost of specialized Automotive parts. Freight experts recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed auto parts pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use Corner boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive vehicle parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

When shipping auto parts via ground from Monterrey to Guadalajara, it's important to ensure that the items are securely packaged to prevent damage during transit. Fragile components should be cushioned, and heavier parts should be properly secured to avoid shifting. Additionally, temperature-sensitive parts may require climate-controlled transport depending on the season.

Shipping auto parts from Monterrey to Guadalajara does not typically require customs documentation, as this is an internal route within Mexico. However, it is essential to have proper invoices and packing lists that accurately describe the auto parts being transported, as these may be needed for inspections or regulatory compliance during transit.

The idea is that we believe that with one shipment we can prove our visibility, reliability, and partnership approach in a tangible way.

Our SAMMIE platform is an AI-driven exception management and tracking platform that provides real-time tracking, predictive ETAs, smart alerts, document intelligence, rate and route optimization, and invoicing insights for your shipments.

DNA offers global ocean freight with worldwide routing, top-tier carriers, full container loads (FCL), less-than-container loads (LCL), and port-to-door service including customs and final-mile delivery.