Shipping Vehicle Components from Montreal to Buenos Aires via Ocean Freight

For moisture-sensitive Auto parts, choose inner sealed pouches around each component, then place them in Sturdy cartons with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, evaluate adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You Can ship car tires with boxed car parts, but They should be physically separated and properly secured. We recommend palletizing boxed auto components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive Automotive parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers can require special handling notes, depending on the type and quantity of fluid. You should Check whether the product is classified as dangerous goods under IMDG and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules are typically shipped with enhanced transit insurance. Carrier default liability Is often limited and may not cover the full replacement cost of specialized Automotive parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed Automotive pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use Corner boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

Key documentation includes a commercial invoice, packing list, and a bill of lading. Additionally, an import permit may be required by Argentine customs for auto parts, along with compliance with any specific regulations regarding automotive components.

Seasonal considerations include potential weather impacts during winter months in Montreal, which may affect port operations and loading schedules. Additionally, the Atlantic hurricane season may influence shipping routes and schedules during the summer months.

The “One Test Run Challenge” is an invitation to move a single shipment with DNA so we can demonstrate our visibility, reliability, and partnership, showing how our SAMMIE platform and proactive team perform in a real-world test.

Yes, you can. You don’t have to move your whole operation; you can give us one shipment in any mode or lane as a “test run,” and we’ll handle it end-to-end with precision, transparency, and care.

SAMMIE gives you a live look at shipments from port to final delivery with 18 milestone updates, satellite container tracking, and instant alerts, so your team always knows what’s moving, what’s delayed, and what’s next.