Shipping Car Parts from Nanjing to Charleston via Ocean Freight

For moisture-sensitive automotive parts, Use inner sealed pouches around each component, then place them in Sturdy cartons with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You may ship Tires with boxed car parts, but They should be physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers May require special handling notes, depending on the type and quantity of fluid. You should Check whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules Are best shipped with enhanced transit insurance. Carrier default liability Is often limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed auto parts pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use Corner boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

When shipping auto parts, it is important to ensure that they are properly packaged to prevent damage during transit. Specific handling considerations include using anti-corrosive materials for metal parts, ensuring that sensitive components are cushioned, and labeling packages clearly to identify the contents. Additionally, compliance with international shipping standards for hazardous materials, if applicable, must be observed.

Regulatory requirements for shipping auto parts from Nanjing to Charleston include compliance with U.S. Customs and Border Protection regulations. Importers must provide appropriate documentation such as a commercial invoice, packing list, and any necessary certificates of origin or compliance with safety standards. Additionally, auto parts may be subject to tariffs and must adhere to the U.S. Department of Transportation regulations regarding vehicle components.

The Actionable Shipment Intelligence feature surface trends, spot delays, and enable you to run exportable reports, while the system learns from every shipment to improve the next one.

The platform improves your client service by allowing you to quickly and efficiently update your customers on their shipments and providing the visibility and data needed to meet the customer service your clients expect.

To explore additional services, you can visit the section to explore DNA Supply Chain’s complete logistics services.