Shipping Tires from Nashville to Baltimore via Ocean Freight

For moisture-sensitive automotive parts, select inner sealed pouches around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You may ship vehicle tires with boxed car parts, but they must be physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers often require special handling notes, depending on the type and quantity of fluid. Exporters should Check whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules should be shipped with enhanced transit insurance. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed auto parts pallet loads, position the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use angle boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

Shipments of auto parts within the United States typically require a bill of lading and an invoice detailing the contents and value of the shipment. Additionally, any specific regulations pertaining to automotive parts must be adhered to, ensuring compliance with U.S. regulations.

While both Nashville and Baltimore experience varying weather conditions, ocean freight is generally less affected by seasonal changes compared to land transport. However, it is advisable to monitor weather patterns that could impact port operations or shipping schedules during peak seasons.

DNA addresses risk and delays by using SAMMIE as a mission-critical platform with live data, predictive alerts, and exception management so importers can manage risk, reduce delays, and reclaim control.

Our platform provides smart, preemptive alerts about delays, reroutes, or exceptions so you are notified before you even ask.

Yes, DNA provides port-to-door service that covers customs and final-mile delivery.