Shipping Auto Parts from Navegantes to Callao via Ocean Freight

For moisture-sensitive Auto parts, Use inner sealed pouches around each component, then place them in Sturdy cartons with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, evaluate adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You Can ship Tires with boxed car parts, but They should be physically separated and properly secured. We recommend palletizing boxed auto components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers May require special handling notes, depending on the type and quantity of fluid. You should Check whether the product is classified as dangerous goods under IMDG and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules Are best shipped with enhanced transit insurance. Carrier default liability Is often limited and may not cover the full replacement cost of specialized Automotive parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed Automotive pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use Corner boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

When shipping auto parts, it is important to ensure that items are securely packaged to prevent damage during ocean transport. Additionally, proper labeling is essential for customs clearance. Special care should be taken for sensitive components that may require climate control or specific handling to avoid deterioration.

The required documentation typically includes a commercial invoice, packing list, and bill of lading. Additionally, shippers must provide certificates of origin and any necessary regulatory compliance documents specific to automotive parts, as well as adhere to customs regulations between Brazil and Peru.

We provide scalable capacity for seasonal spikes as part of our ground transportation solutions.

We provide warehousing and distribution with inventory management and reporting, B2B pick/pack and palletization, cross-docking, transloading, and partnered facilities in key logistics hubs.

Yes, we provide global shipment support for hardware, electronics, and high-value IT assets with secure handling.