Shipping Automotive Parts from Navegantes to Omaha via Ocean Freight

For moisture-sensitive car parts, choose inner sealed pouches around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, assess adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You are allowed to ship car tires with boxed car parts, but it is best that they are physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking vehicle tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled vehicle parts such as fuel system components, shock absorbers, or oil coolers can require special handling notes, depending on the type and quantity of fluid. Shippers should Check whether the product is classified as dangerous goods under DOT and IATA regulations and prepare the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value vehicle components such as engines, transmissions, ECUs, and safety modules are typically shipped with enhanced transit insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure will be processed efficiently.

To reduce damage in mixed vehicle components pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use edge protectors, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and visibly tag any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

When shipping auto parts, it is essential to ensure proper packaging to prevent damage during transit. Auto parts should be secured and cushioned to withstand the ocean environment, including potential exposure to moisture and vibrations. Additionally, special care should be taken to comply with any specific handling instructions for sensitive components.

Required documentation for customs clearance typically includes a commercial invoice, packing list, bill of lading, and any specific certificates related to the auto parts, such as compliance with safety and environmental regulations. It is also important to ensure all documents are accurately completed to facilitate smooth customs processing at both ports.

Our services include predictive ETAs and real-time updates, supported by SAMMIE’s AI models and tracking capabilities.

Our trucking services cover FTL, LTL, and drayage services for a range of shipment sizes and needs.

Our customs services include FDA, USDA, and multi-agency support to help you navigate compliance.