Shipping Auto Parts from Navegantes to Santos via Ocean Freight

For moisture-sensitive Auto parts, select inner sealed pouches around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You Can ship vehicle tires with boxed car parts, but they must be physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers often require special handling notes, depending on the type and quantity of fluid. Exporters should Check whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules should be shipped with enhanced transit insurance. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed Automotive pallet loads, position the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use angle boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

When shipping auto parts via ocean, it is crucial to ensure that all items are securely packaged to prevent damage during transit. Additionally, specific auto parts may require temperature-controlled conditions or protection from moisture, especially if they are sensitive components.

The required documentation for shipping auto parts includes a commercial invoice, packing list, bill of lading, and any relevant import/export permits. It's also important to have the appropriate customs declarations to comply with Brazilian regulations when transporting goods between ports.

Human verification plays a key role because before arrival, our team verifies data to complement live carrier feeds, port tracking, and AI rules, improving the accuracy of our DNA Expert ETA.

Yes, we provide live tracking with GPS and satellite-based updates that keep you informed from port to door.

Yes, we provide predictive ETAs and real-time updates, supported by SAMMIE’s AI models and tracking capabilities.