Shipping Auto Components from Navegantes to Shekou via Ocean Freight

For moisture-sensitive Auto parts, Use inner poly bags with desiccant around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Dry Storage Only”. For export or long-duration transit, Consider adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You Can ship Tires with boxed automotive parts, but it is best that they are physically separated and properly secured. We recommend palletizing boxed car parts and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive Automotive parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers May require dangerous goods documentation, depending on the type and quantity of fluid. Shippers should Check whether the product is classified as dangerous goods under relevant transport regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules Are best shipped with declared value coverage. Carrier default liability is usually limited and may not cover the full replacement cost of specialized Automotive parts. Freight experts recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed Automotive pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and car tires above. Use edge protectors, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive vehicle parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

When shipping auto parts via ocean freight, it is essential to ensure that the components are properly secured and packaged to prevent damage during transit. Additionally, specific auto parts may require temperature control or humidity protection, depending on their material composition.

Shipping auto parts from Navegantes to Shekou requires compliance with both Brazilian export regulations and Chinese import regulations. Documentation such as commercial invoices, packing lists, and certificates of origin may be necessary. Import duties and taxes must also be considered, along with any specific standards or certifications required by Chinese authorities for automotive products.

We ask for just one test run because we believe that with one shipment we can prove our visibility, reliability, and partnership approach in a tangible way.

SAMMIE is an AI-driven exception management and tracking platform that provides real-time tracking, predictive ETAs, smart alerts, document intelligence, rate and route optimization, and invoicing insights for your shipments.

We provide global ocean freight with worldwide routing, top-tier carriers, full container loads (FCL), less-than-container loads (LCL), and port-to-door service including customs and final-mile delivery.