Shipping Vehicle Tires from New Orleans to Lazaro Cardenas via Ocean Freight

For moisture-sensitive Auto parts, choose inner poly bags with desiccant around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, evaluate adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You Can ship car tires with boxed automotive parts, but they must be physically separated and properly secured. We recommend palletizing boxed auto components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers can require dangerous goods documentation, depending on the type and quantity of fluid. Exporters should Check whether the product is classified as dangerous goods under IMDG and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules are typically shipped with declared value coverage. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized Automotive parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed Automotive pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and car tires above. Use angle boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

The required documentation typically includes a commercial invoice, bill of lading, export declaration, and any necessary certificates of origin or compliance with U.S. and Mexican regulations.

Auto parts should be properly packaged to prevent damage during transit, and special care should be taken to secure them in the shipping container to avoid shifting. Additionally, it is important to consider the potential for corrosion due to moisture in ocean freight.

Yes, we do. Our licensed customs experts handle import/export compliance, HS classification, tariff codes, ISF filings, and coordination with U.S. and international agencies.

SAMMIE flags potential issues such as rerouted containers or port congestion early, giving our team time to step in quickly, resolve problems, and keep you proactively updated.

Yes, your data is secure. All shipment, billing, and documentation data is encrypted in transit and at rest, and SAMMIE uses secure protocols and authentication layers to control access.