Shipping Auto Parts from New York to Oakland via Ocean Freight

For moisture-sensitive car parts, Use inner poly bags with desiccant around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Dry Storage Only”. For export or long-duration transit, Consider adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You are allowed to ship Tires with boxed automotive parts, but it is best that they are physically separated and properly secured. We recommend palletizing boxed car parts and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive Automotive parts, as this can cause crushing or punctures during transit.

Fluid-filled vehicle parts such as fuel system components, shock absorbers, or oil coolers May require dangerous goods documentation, depending on the type and quantity of fluid. Shippers should Check whether the product is classified as dangerous goods under relevant transport regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value vehicle components such as engines, transmissions, ECUs, and safety modules Are best shipped with declared value coverage. Carrier default liability is usually limited and may not cover the full replacement cost of specialized Automotive parts. Freight experts recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed vehicle components pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and car tires above. Use edge protectors, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive vehicle parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

When shipping auto parts via ocean, it is important to ensure that the parts are properly packaged to prevent damage during transit. Fragile components should be cushioned, and all items should be securely fastened in containers to avoid shifting. Additionally, compliance with any specific handling requirements related to hazardous materials must be observed, as some auto parts may contain such materials.

The primary documentation required includes a Bill of Lading, Commercial Invoice, and any necessary export declarations. Since both New York and Oakland are within the United States, customs documentation is generally streamlined, but any specific regulations regarding the importation of auto parts must still be adhered to, including compliance with safety and environmental standards.

Our document features are able to auto-tag and organize bills of lading, customs forms, and invoices so you no longer need to hunt through folders or inboxes.

You may read more about the company when you visit the “Meet the people and values behind DNA Supply Chain Solutions” section linked from the SAMMIE page.

Our CEO believes the best work happens quietly when everything runs smoothly and no one’s watching, and he applies that mindset to logistics and to life.