Shipping Vehicle Parts from Newark to Minneapolis via Ocean Freight

For moisture-sensitive car parts, Use inner Moisture-barrier bags around each component, then place them in Sturdy cartons with sufficient cushioning. Seal all seams with strong packing tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, evaluate adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You are allowed to ship Tires with boxed Auto parts, but They should be physically separated and properly secured. Logistics providers commonly recommend palletizing boxed auto components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled vehicle parts such as fuel system components, shock absorbers, or oil coolers May require Hazardous materials declarations, depending on the type and quantity of fluid. You should verify whether the product is classified as dangerous goods under IMDG and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value vehicle components such as engines, transmissions, ECUs, and safety modules Are best shipped with Full-value cargo insurance. Carrier default liability Is often limited and may not cover the full replacement cost of specialized vehicle parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed vehicle components pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and Tires above. Use Corner boards, shrink wrap and bands to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

When shipping auto parts via ocean freight, it is essential to ensure that the parts are properly packaged to prevent damage during transit. This includes using protective materials and securing parts to prevent movement. Additionally, specific handling instructions may be required based on the type of auto parts being shipped, such as ensuring that sensitive components are stored in climate-controlled conditions to avoid corrosion.

For shipping auto parts within the United States, the required documentation typically includes a bill of lading, commercial invoice, and any necessary export or import permits if applicable. Since both Newark and Minneapolis are in the U.S., there are usually no customs clearance requirements; however, proper documentation must be maintained for internal record-keeping and compliance.

Our system was developed after a high-stakes wake-up call in 2017, when a critical container for a client’s first shipment with Marriott was delayed by 10 days, prompting us to build a more accurate, visibility-focused solution.

For clients, it means our AI-enhanced platform SAMMIE is not just software but a total supply chain management system that delivers on the promise of real-time visibility, predictive alerts, and seamless coordination.

Our founder is highlighting that we deliver not only exceptional logistics performance but also real, human relationships and authentic connection with our clients.