Shipping Auto Components from Ningbo to Charlotte via Ocean Freight

For moisture-sensitive Auto parts, select inner Moisture-barrier bags around each component, then place them in Sturdy cartons with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, assess adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You Can ship vehicle tires with boxed Auto parts, but They should be physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking vehicle tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers often require Hazardous materials declarations, depending on the type and quantity of fluid. You should Check whether the product is classified as dangerous goods under DOT and IATA regulations and prepare the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules should be shipped with Full-value cargo insurance. Carrier default liability Is often limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure will be processed efficiently.

To reduce damage in mixed Automotive pallet loads, position the heaviest metal components at the bottom, with lighter boxes and Tires above. Use Corner boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and visibly tag any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

When shipping auto parts, it is important to ensure that items are securely packaged to prevent damage during transit. Additionally, specific auto parts may require compliance with international shipping regulations, including proper labeling and documentation to facilitate customs clearance upon arrival in the United States.

Shipping auto parts from China to the United States requires compliance with U.S. Customs and Border Protection regulations, including the submission of a bill of lading, commercial invoice, and any necessary certificates of origin or compliance with safety standards. Importers should also be aware of tariffs and duties applicable to automotive parts.

Yes, DNA is fully licensed, bonded, and compliant with U.S. and international freight regulations as a Freight Forwarder, with credentials including Freight Forwarder & NVOCC License 019344, USDOT 3458744, MC-1128283, FMC Bond 91385, and C-TPAT Certification 24009050.

Yes, SAMMIE uses trained AI models to match documents, verify charges, and identify anomalies such as duplicate invoices, unmatched line items, or missing customs paperwork.

Transit times vary on lane, mode, and carrier, but SAMMIE provides up-to-date, predictive ETAs that factor in real-world conditions like port congestion and weather delays.