Shipping Tires from Norfolk to Buenos Aires via Ocean Freight

For moisture-sensitive automotive parts, choose inner sealed pouches around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with strong packing tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, evaluate adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You may ship car tires with boxed car parts, but it is best that they are physically separated and properly secured. Logistics providers commonly recommend palletizing boxed Vehicle components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive Automotive parts, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers can require special handling notes, depending on the type and quantity of fluid. Shippers should verify whether the product is classified as dangerous goods under DOT and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules are typically shipped with enhanced transit insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized vehicle parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed auto parts pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use edge protectors, shrink wrap and bands to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

Auto parts should be securely packaged to prevent damage during transit, considering the potential for exposure to moisture and saltwater. It is also important to ensure that parts are marked appropriately for easy identification and handling at ports.

Required documentation includes a commercial invoice, packing list, bill of lading, and any necessary import permits or certificates specific to automotive parts as mandated by Argentine customs regulations.

DNA uses SAMMIE’s AI-driven rate and route optimization to recommend optimal carriers and lanes based on current conditions and prices.

Yes, DNA includes consolidation and customs pre-clearance to help move your air cargo quickly and compliantly.

DNA provides in-house customs brokerage including import/export clearance, tariff classification and valuation, ISF, AMS, and ACE filings, plus FDA, USDA, and multi-agency support.