Shipping Auto Parts from Oakland to Bogota via Ocean Freight

For moisture-sensitive Auto parts, select inner poly bags with desiccant around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Dry Storage Only”. For export or long-duration transit, Consider adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You Can ship vehicle tires with boxed automotive parts, but they must be physically separated and properly secured. We recommend palletizing boxed car parts and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers often require dangerous goods documentation, depending on the type and quantity of fluid. Exporters should Check whether the product is classified as dangerous goods under relevant transport regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules should be shipped with declared value coverage. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized Automotive parts. Freight experts recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed Automotive pallet loads, position the heaviest metal components at the bottom, with lighter boxes and car tires above. Use angle boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive vehicle parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

When shipping auto parts, it is essential to ensure proper packaging to prevent damage during transit. Components should be secured to avoid movement, and sensitive parts may require additional cushioning. It is also important to comply with any specific regulations regarding hazardous materials if applicable.

Required documentation typically includes a commercial invoice, packing list, and bill of lading. Additionally, shippers must provide certificates of origin and any specific import permits required by Colombian authorities for automotive parts.

Yes, we can full port-to-door service, managing booking, loading, customs clearance, and final-mile delivery with one point of contact and one visibility platform.

Yes, they are. You can see our certifications and compliance credentials, including FMC license, DOT number, and C-TPAT partnership, in the Certifications section of our FAQs.

If something looks off, our team responds quickly, and SAMMIE also flags duplicates or anomalies before invoices are sent, with your dedicated Client Success Officer available for clarification.