Shipping Vehicle Parts from Paranagua to Rio Grande via Ocean Freight

For moisture-sensitive Auto parts, choose inner sealed pouches around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, evaluate adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You Can ship car tires with boxed car parts, but it is best that they are physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers can require special handling notes, depending on the type and quantity of fluid. Shippers should Check whether the product is classified as dangerous goods under DOT and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules are typically shipped with enhanced transit insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed Automotive pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use edge protectors, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

When shipping auto parts via ocean, it is essential to ensure that the parts are properly packaged to prevent damage during transit. Additionally, due to the nature of automotive parts, they should be secured to avoid shifting during loading and unloading. Consideration for rust prevention is also necessary, especially for metal components exposed to humidity.

The required documentation for shipping auto parts within Brazil includes a Bill of Lading, commercial invoice, and customs declaration. It is important to ensure that all documentation complies with Brazilian regulations to facilitate smooth customs clearance at both ports.

Actionable Shipment Intelligence in SAMMIE surface trends, spot delays, and enable you to run exportable reports, while the system learns from every shipment to improve the next one.

SAMMIE helps with customer service by allowing you to quickly and efficiently update your customers on their shipments and providing the visibility and data needed to meet the customer service your clients expect.

You can learn more by visit the section to explore DNA Supply Chain’s complete logistics services.