Shipping Automotives from Paranagua to Yantian via Ocean Freight

For moisture-sensitive Auto parts, Use inner sealed pouches around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Dry Storage Only”. For export or long-duration transit, assess adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You Can ship Tires with boxed car parts, but they must be physically separated and properly secured. We recommend palletizing boxed car parts and then stacking or racking vehicle tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers May require special handling notes, depending on the type and quantity of fluid. Exporters should Check whether the product is classified as dangerous goods under relevant transport regulations and prepare the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules Are best shipped with enhanced transit insurance. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized Automotive parts. Freight experts recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure will be processed efficiently.

To reduce damage in mixed Automotive pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use angle boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive vehicle parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and visibly tag any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

Auto parts should be properly packaged and secured to prevent damage during transit. It is important to consider the weight and size of the parts, as well as potential exposure to moisture during ocean freight. Additionally, specific handling instructions should be communicated to ensure compliance with safety regulations.

The required documentation typically includes a commercial invoice, packing list, bill of lading, and any necessary certificates of origin or compliance. It is essential to ensure that all documentation accurately reflects the nature of the auto parts being shipped to facilitate customs clearance in Yantian.

Most customers are up and running within days, after we gather basic shipment details and compliance documents, set up your profile, configure SAMMIE access, and align your first shipment.

Most platforms only show carrier data, while SAMMIE is built on ecosystem data from third-party sources and DNA’s proprietary history, enabling predictive ETAs, intelligent alerts, and advanced automation powered by clean, validated data.

We offer international shipping by ocean (FCL and LCL), air (standard and expedited), and domestic or cross-border ground freight (FTL, LTL, and intermodal).