Shipping Vehicle Parts from Penang to Lazaro Cardenas via Ocean Freight

For moisture-sensitive Auto parts, Use inner poly bags with desiccant around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You Can ship Tires with boxed automotive parts, but they must be physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers May require dangerous goods documentation, depending on the type and quantity of fluid. Exporters should Check whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules Are best shipped with declared value coverage. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed Automotive pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and car tires above. Use angle boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

The documentation typically required includes a commercial invoice, packing list, bill of lading, and any necessary import/export permits. Additionally, a certificate of origin may be required to comply with trade agreements between Malaysia and Mexico.

The Port of Penang is equipped with modern cargo handling facilities and has specialized terminals for containerized cargo, while Lazaro Cardenas boasts deep-water access and advanced loading/unloading equipment suitable for heavy and bulk shipments, including automotive parts.

We use SAMMIE’s AI-driven rate and route optimization to recommend optimal carriers and lanes based on current conditions and prices.

Yes, we provide consolidation and customs pre-clearance to help move your air cargo quickly and compliantly.

We offer in-house customs brokerage including import/export clearance, tariff classification and valuation, ISF, AMS, and ACE filings, plus FDA, USDA, and multi-agency support.