Shipping Vehicle Tires from Port Everglades to Savannah via Ocean Freight

For moisture-sensitive automotive parts, choose inner poly bags with desiccant around each component, then place them in Sturdy cartons with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, evaluate adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You may ship car tires with boxed automotive parts, but They should be physically separated and properly secured. We recommend palletizing boxed auto components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers can require dangerous goods documentation, depending on the type and quantity of fluid. You should Check whether the product is classified as dangerous goods under IMDG and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules are typically shipped with declared value coverage. Carrier default liability Is often limited and may not cover the full replacement cost of specialized Automotive parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed auto parts pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and car tires above. Use Corner boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

When shipping auto parts, it is important to ensure that items are properly packaged to prevent damage during transit. Parts should be secured and cushioned to withstand potential vibrations and movement during ocean freight. Additionally, specific auto parts may require temperature control or special handling if they are sensitive to humidity or environmental conditions.

While both ports are within the United States, all shipments must comply with U.S. Customs regulations. Proper documentation, including a bill of lading and any necessary declarations for automotive parts, must be prepared. Additionally, any auto parts subject to specific regulations, such as those containing hazardous materials, need to meet federal and state guidelines for transport.

DNA offers scalable capacity for seasonal spikes as part of our ground transportation solutions.

DNA offers warehousing and distribution with inventory management and reporting, B2B pick/pack and palletization, cross-docking, transloading, and partnered facilities in key logistics hubs.

Yes, DNA offers global shipment support for hardware, electronics, and high-value IT assets with secure handling.