Shipping Car Tires from Port Klang to Atlanta via Ocean Freight

For moisture-sensitive automotive parts, select inner sealed pouches around each component, then place them in Sturdy cartons with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, assess adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You may ship vehicle tires with boxed car parts, but They should be physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking vehicle tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers often require special handling notes, depending on the type and quantity of fluid. You should Check whether the product is classified as dangerous goods under DOT and IATA regulations and prepare the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules should be shipped with enhanced transit insurance. Carrier default liability Is often limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure will be processed efficiently.

To reduce damage in mixed auto parts pallet loads, position the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use Corner boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and visibly tag any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

Shipping auto parts from Port Klang to Atlanta requires several key documents, including a Bill of Lading, Commercial Invoice, Packing List, and any necessary export permits. Additionally, compliance with U.S. Customs and Border Protection regulations is essential for clearance upon arrival in the United States.

Yes, when shipping auto parts via ocean freight from Port Klang to Atlanta, it is important to ensure that parts are properly packed to prevent damage during transit. Items should be secured in containers with appropriate cushioning, and hazardous materials must be identified and handled according to international regulations.

You’re invited to take the DNA “One Test Run Challenge” with a single shipment so we can demonstrate our visibility, reliability, and partnership-focused approach.

DNA Supply Chain offers ocean freight (FCL and LCL), air freight, ground transportation (domestic and cross-border trucking), customs brokerage, and warehousing & distribution, all supported by our SAMMIE visibility platform and dedicated Client Success Officers.

DNA provides secure, strategically located warehousing for scalable storage and just-in-time fulfillment, with real-time inventory control and integrated distribution powered by SAMMIE’s insight and our responsive Client Success Officers.