Shipping Automotives from Port Klang to Baltimore via Ocean Freight

For moisture-sensitive Auto parts, Use inner poly bags with desiccant around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, assess adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You Can ship Tires with boxed automotive parts, but they must be physically separated and properly secured. Most carriers recommend palletizing boxed Vehicle components and then stacking or racking vehicle tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers May require dangerous goods documentation, depending on the type and quantity of fluid. Exporters should review whether the product is classified as dangerous goods under DOT and IATA regulations and prepare the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules Are best shipped with declared value coverage. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized auto parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure will be processed efficiently.

To reduce damage in mixed Automotive pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and car tires above. Use angle boards, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and visibly tag any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

The required documentation includes a commercial invoice, packing list, bill of lading, and any necessary export permits from Malaysia. Additionally, import documentation such as a customs declaration and any applicable certificates of origin may be required upon arrival in Baltimore.

Yes, shipping auto parts from Malaysia to the United States must comply with U.S. Customs and Border Protection regulations, including adherence to safety standards and import tariffs. It is essential to ensure that the parts meet the necessary Federal Motor Vehicle Safety Standards (FMVSS) and any other relevant regulations.

We are fully compliant with CBP, TSA, IATA, and NMFTA standards to ensure secure, lawful, and efficient cross-border operations.

Yes, for CE North America, where we built a custom EDI feed that pushes real-time shipment updates, documentation, and exception alerts directly into their ERP, eliminating dozens of manual tasks and improving cross-department visibility.

Yes, we can full port-to-door service, managing booking, loading, customs clearance, and final-mile delivery with one point of contact and one visibility platform.