Shipping Vehicle Tires from Port Klang to Honolulu via Ocean Freight

For moisture-sensitive Auto parts, Use inner sealed pouches around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with strong packing tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, evaluate adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You Can ship Tires with boxed car parts, but it is best that they are physically separated and properly secured. Logistics providers commonly recommend palletizing boxed auto components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive Automotive parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers May require special handling notes, depending on the type and quantity of fluid. Shippers should verify whether the product is classified as dangerous goods under IMDG and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules Are best shipped with enhanced transit insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized vehicle parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed Automotive pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use edge protectors, shrink wrap and bands to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

Auto parts should be properly packaged to prevent damage during the lengthy ocean freight journey. It's essential to use moisture-resistant materials and secure all components to avoid shifting. Additionally, ensure that the packaging complies with international shipping standards to facilitate customs clearance.

Shipments of auto parts from Malaysia to the U.S. require compliance with the U.S. Customs and Border Protection regulations, including accurate documentation such as a Commercial Invoice and Bill of Lading. Additionally, the auto parts may need to meet specific safety and environmental standards set by U.S. authorities, which may require additional certifications or inspections.

Yes, we support FTL, LTL, and drayage services for a range of shipment sizes and needs.

Yes, we offer FDA, USDA, and multi-agency support to help you navigate compliance.

Yes, we support omnichannel retail, including ecommerce, DTC brands, and big-box retailers with scalable shipping and inventory services.