Shipping Automotives from Port Klang to Omaha via Ocean Freight

For moisture-sensitive Auto parts, select inner sealed pouches around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, evaluate adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You Can ship vehicle tires with boxed car parts, but they must be physically separated and properly secured. Most carriers recommend palletizing boxed Vehicle components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers often require special handling notes, depending on the type and quantity of fluid. Exporters should review whether the product is classified as dangerous goods under DOT and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules should be shipped with enhanced transit insurance. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized auto parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed Automotive pallet loads, position the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use angle boards, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

Auto parts must be securely packaged to prevent damage during transit. It is essential to use appropriate cushioning materials and ensure that all parts are properly labeled. Additionally, as some auto parts may be sensitive to humidity and temperature fluctuations, climate-controlled containers may be necessary during ocean freight.

Required documentation typically includes a commercial invoice, packing list, bill of lading, and any necessary export permits. Importers in the United States may also need to provide an entry manifest and comply with specific regulatory requirements, such as those from the Environmental Protection Agency (EPA) or the Department of Transportation (DOT) for certain auto parts.

SAMMIE was born after a high-stakes wake-up call in 2017, when a critical container for a client’s first shipment with Marriott was delayed by 10 days, prompting us to build a more accurate, visibility-focused solution.

It means our AI-enhanced platform SAMMIE is not just software but a total supply chain management system that delivers on the promise of real-time visibility, predictive alerts, and seamless coordination.

It means we deliver not only exceptional logistics performance but also real, human relationships and authentic connection with our clients.