Shipping Car Tires from Port Said to Shanghai via Ocean Freight

For moisture-sensitive Auto parts, Use inner Moisture-barrier bags around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, evaluate adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You Can ship Tires with boxed Auto parts, but it is best that they are physically separated and properly secured. We recommend palletizing boxed auto components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive Automotive parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers May require Hazardous materials declarations, depending on the type and quantity of fluid. Shippers should Check whether the product is classified as dangerous goods under IMDG and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules Are best shipped with Full-value cargo insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized Automotive parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed Automotive pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and Tires above. Use edge protectors, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

The documentation typically includes a commercial invoice, packing list, bill of lading, and any specific certificates required by Chinese customs for automotive parts, such as quality assurance certificates.

Yes, auto parts should be securely packed to prevent damage during transit, and special care should be taken for sensitive components that may require climate control to avoid corrosion or deterioration during the ocean journey.

We use SAMMIE’s AI-driven rate and route optimization to recommend optimal carriers and lanes based on current conditions and prices.

Yes, we provide consolidation and customs pre-clearance to help move your air cargo quickly and compliantly.

We offer in-house customs brokerage including import/export clearance, tariff classification and valuation, ISF, AMS, and ACE filings, plus FDA, USDA, and multi-agency support.