Shipping Car Parts from Rotterdam to Manzanillo via Ocean Freight

For moisture-sensitive Auto parts, choose inner Moisture-barrier bags around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, evaluate adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You Can ship car tires with boxed Auto parts, but it is best that they are physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers can require Hazardous materials declarations, depending on the type and quantity of fluid. Shippers should Check whether the product is classified as dangerous goods under DOT and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules are typically shipped with Full-value cargo insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed Automotive pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and Tires above. Use edge protectors, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

Required documentation includes a commercial invoice, packing list, bill of lading, and any necessary certificates of origin or compliance specific to automotive parts for customs clearance in Mexico.

Yes, auto parts should be securely packaged to prevent damage during transit and should be labeled clearly for customs inspection. Additionally, it is important to consider the potential for humidity exposure during ocean transport, which may require moisture-absorbing materials in the packaging.

Transit times vary on lane, mode, and carrier, but SAMMIE provides up-to-date, predictive ETAs that factor in real-world conditions like port congestion and weather delays.

Yes, we manage AES filings, commercial invoices, packing lists, and export declarations to ensure accuracy and compliance for outbound shipments.

Yes, for enterprise clients we support EDI and API-based billing feeds that automatically sync with your ERP or accounting platform for seamless updates and faster financial close cycles.