Shipping Auto Components from Salalah to Houston via Ocean Freight

For moisture-sensitive Auto parts, Use inner sealed pouches around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Dry Storage Only”. For export or long-duration transit, evaluate adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You Can ship Tires with boxed car parts, but it is best that they are physically separated and properly secured. Most carriers recommend palletizing boxed car parts and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers May require special handling notes, depending on the type and quantity of fluid. Shippers should review whether the product is classified as dangerous goods under relevant transport regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules Are best shipped with enhanced transit insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized auto parts. Freight experts recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed Automotive pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use edge protectors, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive vehicle parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

Documentation requirements typically include a commercial invoice, packing list, bill of lading, and any necessary import permits or licenses required by U.S. customs for automotive parts.

The Port of Salalah is equipped with modern container handling facilities and specialized cargo handling systems, while the Port of Houston features extensive cargo handling equipment and warehousing facilities suitable for automotive parts.

Yes, we are fully licensed (FMC #019344), bonded, insured, and C-TPAT compliant, with a digital-first customs process that uses automation to reduce delays, cut risk, and ensure regulatory compliance.

Yes, you will have a dedicated Client Success Officer who oversees your freight, solves problems proactively, and keeps you informed throughout each shipment.

We say this because a single shipment is enough for shippers to experience our AI-powered visibility, proactive issue management, and partner-level support, and to see how we differ from larger, less responsive forwarders.