Shipping Auto Parts from Salalah to Port Everglades via Ocean Freight

For moisture-sensitive car parts, choose inner Moisture-barrier bags around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You are allowed to ship car tires with boxed Auto parts, but it is best that they are physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled vehicle parts such as fuel system components, shock absorbers, or oil coolers can require Hazardous materials declarations, depending on the type and quantity of fluid. Shippers should Check whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value vehicle components such as engines, transmissions, ECUs, and safety modules are typically shipped with Full-value cargo insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed vehicle components pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and Tires above. Use edge protectors, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

When shipping auto parts via ocean freight, it is essential to ensure that the items are properly packaged to prevent damage during transit. Auto parts should be secured in containers that can withstand ocean conditions, including potential moisture exposure. Additionally, it is advisable to use cushioning materials to protect fragile components.

Shipping auto parts from Oman to the United States requires compliance with U.S. Customs and Border Protection regulations, including proper documentation such as the commercial invoice, packing list, and any necessary import permits. Additionally, the auto parts must meet U.S. safety and environmental standards, including compliance with the EPA and DOT regulations.

Our customs brokerage includes tariff classification and valuation as part of our in-house expertise.

Our network includes partnered facilities in key logistics hubs, including locations near important ports for strategic storage and fulfillment.

We encourage you to take the DNA “One Test Run Challenge” with a single shipment so we can demonstrate our visibility, reliability, and partnership-focused approach.