Shipping Auto Parts from San Jose to Ningbo via Ocean Freight

For moisture-sensitive Auto parts, select inner poly bags with desiccant around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, Consider adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You Can ship vehicle tires with boxed automotive parts, but it is best that they are physically separated and properly secured. We recommend palletizing boxed auto components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers often require dangerous goods documentation, depending on the type and quantity of fluid. Shippers should Check whether the product is classified as dangerous goods under IMDG and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules should be shipped with declared value coverage. Carrier default liability is usually limited and may not cover the full replacement cost of specialized Automotive parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed Automotive pallet loads, position the heaviest metal components at the bottom, with lighter boxes and car tires above. Use edge protectors, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

Auto parts require careful handling to prevent damage during transit. It is important to ensure that all components are securely packaged and labeled appropriately to comply with international shipping standards. Additionally, considering the weight and size of the auto parts, proper stowage on the vessel is crucial to maintain stability and prevent shifting during the voyage.

Shipping auto parts from San Jose to Ningbo requires several key documents, including a commercial invoice, packing list, bill of lading, and any applicable export permits from Costa Rica. Import documentation for China must also be prepared, which may include a customs declaration and any specific certifications required for automotive parts to ensure compliance with Chinese regulations.

We provide warehousing and distribution with inventory management and reporting, B2B pick/pack and palletization, cross-docking, transloading, and partnered facilities in key logistics hubs.

Yes, we provide global shipment support for hardware, electronics, and high-value IT assets with secure handling.

SAMMIE includes AI-powered ETAs, “hot” shipment flagging, instant delay alerts, live map tracking for every container globally, and centralized, searchable storage for BOLs, invoices, and customs forms.