Shipping Auto Components from San Juan to Detroit via Ocean Freight

For moisture-sensitive automotive parts, Use inner Moisture-barrier bags around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, assess adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You may ship Tires with boxed Auto parts, but they must be physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking vehicle tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers May require Hazardous materials declarations, depending on the type and quantity of fluid. Exporters should Check whether the product is classified as dangerous goods under DOT and IATA regulations and prepare the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules Are best shipped with Full-value cargo insurance. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure will be processed efficiently.

To reduce damage in mixed auto parts pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and Tires above. Use angle boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and visibly tag any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

Auto parts should be securely packaged to prevent damage during transit. It is important to consider potential exposure to moisture and saltwater, which can lead to corrosion. Using rust-inhibiting materials and moisture-absorbing packets can help protect the auto parts during the ocean journey.

Since Puerto Rico is a U.S. territory, auto parts shipped from San Juan to Detroit do not require a customs declaration for importation into the mainland U.S. However, compliance with U.S. safety and environmental regulations for automotive components must be ensured. Proper documentation, including invoices and packing lists, should be prepared for the shipping process.

The Actionable Shipment Intelligence feature surface trends, spot delays, and enable you to run exportable reports, while the system learns from every shipment to improve the next one.

The platform improves your client service by allowing you to quickly and efficiently update your customers on their shipments and providing the visibility and data needed to meet the customer service your clients expect.

To explore additional services, you can visit the section to explore DNA Supply Chain’s complete logistics services.