Shipping Automotive Parts from San Juan to New York via Ocean Freight

For moisture-sensitive car parts, Use inner sealed pouches around each component, then place them in Sturdy cartons with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, Consider adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You are allowed to ship Tires with boxed car parts, but They should be physically separated and properly secured. Most carriers recommend palletizing boxed auto components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive Automotive parts, as this can cause crushing or punctures during transit.

Fluid-filled vehicle parts such as fuel system components, shock absorbers, or oil coolers May require special handling notes, depending on the type and quantity of fluid. You should review whether the product is classified as dangerous goods under IMDG and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value vehicle components such as engines, transmissions, ECUs, and safety modules Are best shipped with enhanced transit insurance. Carrier default liability Is often limited and may not cover the full replacement cost of specialized auto parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed vehicle components pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use Corner boards, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

The documentation required includes a commercial invoice, packing list, bill of lading, and any necessary customs declarations. Auto parts must comply with U.S. import regulations, which may require additional certifications depending on the specific parts being shipped.

Yes, auto parts should be securely packaged to prevent damage during transit. It is important to consider weight distribution and moisture protection, as ocean freight can expose the cargo to humidity. Additionally, parts should be labeled correctly to ensure proper handling at both the San Juan and New York ports.

Shipping durations depend on lane, mode, and carrier, but SAMMIE provides up-to-date, predictive ETAs that factor in real-world conditions like port congestion and weather delays.

Yes, our experts prepare AES filings, commercial invoices, packing lists, and export declarations to ensure accuracy and compliance for outbound shipments.

Yes, DNA enables EDI and API-based billing feeds that automatically sync with your ERP or accounting platform for seamless updates and faster financial close cycles.