Shipping Auto Parts from Sanshui to Bogota via Ocean Freight

For moisture-sensitive automotive parts, select inner poly bags with desiccant around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You may ship vehicle tires with boxed automotive parts, but they must be physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive Automotive parts, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers often require dangerous goods documentation, depending on the type and quantity of fluid. Exporters should Check whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules should be shipped with declared value coverage. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed auto parts pallet loads, position the heaviest metal components at the bottom, with lighter boxes and car tires above. Use angle boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

Auto parts should be securely packaged to prevent damage during ocean freight. It is essential to use appropriate cushioning materials and ensure that the parts are labeled correctly to facilitate handling at both ports. Additionally, considering the weight and size of the parts is important for compliance with shipping regulations.

The shipment of auto parts from China to Colombia requires compliance with both countries' customs regulations. Essential documentation includes a commercial invoice, packing list, and bill of lading. Import permits may also be necessary, and it is critical to ensure that the auto parts meet Colombian safety and environmental standards.

Yes, you can. You can see our certifications and compliance credentials, including FMC license, DOT number, and C-TPAT partnership, in the Certifications section of our FAQs.

If you spot an issue, we act fast, and SAMMIE also flags duplicates or anomalies before invoices are sent, with your dedicated Client Success Officer available for clarification.

DNA’s Expert Date is the most accurate dynamic forecasts in the industry, using historical data, live vessel telemetry, weather, and port congestion overlays to go beyond basic status updates.