Shipping Vehicle Tires from Sanshui to New Orleans via Ocean Freight

For moisture-sensitive Auto parts, choose inner Moisture-barrier bags around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Dry Storage Only”. For export or long-duration transit, Consider adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You Can ship car tires with boxed Auto parts, but it is best that they are physically separated and properly secured. We recommend palletizing boxed car parts and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers can require Hazardous materials declarations, depending on the type and quantity of fluid. Shippers should Check whether the product is classified as dangerous goods under relevant transport regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules are typically shipped with Full-value cargo insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized Automotive parts. Freight experts recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed Automotive pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and Tires above. Use edge protectors, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive vehicle parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

When shipping auto parts via ocean freight, it is important to ensure that the parts are properly packaged to prevent damage during transit. Additionally, components that are sensitive to humidity and temperature changes should be stored in climate-controlled containers. Proper labeling and securing of the cargo in the shipping container are also crucial to avoid shifting during transport.

Required documentation for customs clearance includes a commercial invoice, packing list, bill of lading, and any necessary certificates of origin or compliance with U.S. regulations. Importers must also ensure that all auto parts comply with U.S. safety and environmental standards to avoid delays at customs.

Human verification plays a key role because before arrival, our team verifies data to complement live carrier feeds, port tracking, and AI rules, improving the accuracy of our DNA Expert ETA.

Yes, we provide live tracking with GPS and satellite-based updates that keep you informed from port to door.

Yes, we provide predictive ETAs and real-time updates, supported by SAMMIE’s AI models and tracking capabilities.