Shipping Auto Parts from Savannah to Seattle via Ocean Freight

For moisture-sensitive automotive parts, Use inner sealed pouches around each component, then place them in Sturdy cartons with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You may ship Tires with boxed car parts, but They should be physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers May require special handling notes, depending on the type and quantity of fluid. You should Check whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules Are best shipped with enhanced transit insurance. Carrier default liability Is often limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed auto parts pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use Corner boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

When shipping auto parts, it is important to ensure proper packaging to prevent damage during transit. Additionally, auto parts may require specific handling to avoid rust or corrosion, especially if they are made of metal. Ensuring compliance with any hazardous materials regulations is also crucial if shipping components that contain such materials.

Required documentation includes a bill of lading, commercial invoice, and packing list. Additionally, shippers must ensure compliance with customs regulations, including any necessary certificates of origin and declarations related to the auto parts being shipped. Proper documentation is essential for smooth customs clearance at both the Savannah and Seattle ports.

DNA works with U.S. Customs & Border Protection (CBP), the FDA, USDA, DOT, and other regulatory bodies, and we maintain active certifications including C-TPAT and FMC.

Yes, we do provide coverage for urgent cases, which are escalated and managed with after-hours monitoring when needed, especially for high-volume or time-critical shipments.

DNA adheres to industry best practices and relevant data protection regulations for international shipping and technology platforms, including GDPR and CCPA where applicable.