Shipping Vehicle Parts from Semarang to Honolulu via Ocean Freight

For moisture-sensitive Auto parts, Use inner poly bags with desiccant around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Dry Storage Only”. For export or long-duration transit, Consider adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You Can ship Tires with boxed automotive parts, but it is best that they are physically separated and properly secured. Most carriers recommend palletizing boxed car parts and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers May require dangerous goods documentation, depending on the type and quantity of fluid. Shippers should review whether the product is classified as dangerous goods under relevant transport regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules Are best shipped with declared value coverage. Carrier default liability is usually limited and may not cover the full replacement cost of specialized auto parts. Freight experts recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed Automotive pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and car tires above. Use edge protectors, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive vehicle parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

Required documentation includes a commercial invoice, packing list, bill of lading, and any necessary export permits from Indonesian authorities. Additionally, import customs documentation must be prepared for U.S. customs clearance, which may include a completed Customs Declaration and any relevant compliance certificates for automotive parts.

Yes, auto parts should be securely packaged to prevent damage during ocean transit. It is important to consider the potential for corrosion due to humidity and saltwater exposure, so using protective coatings and moisture-absorbing materials is recommended. Additionally, weight distribution and securing of cargo within shipping containers should be done to avoid shifting during transport.

Yes, we provide tariff classification and valuation as part of our in-house expertise.

We operate partnered facilities in key logistics hubs, including locations near important ports for strategic storage and fulfillment.

You can start by take the DNA “One Test Run Challenge” with a single shipment so we can demonstrate our visibility, reliability, and partnership-focused approach.