Shipping Car Parts from Shekou to Oakland via Ocean Freight

For moisture-sensitive Auto parts, select inner sealed pouches around each component, then place them in Sturdy cartons with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, assess adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You Can ship vehicle tires with boxed car parts, but They should be physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking vehicle tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive Automotive parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers often require special handling notes, depending on the type and quantity of fluid. You should Check whether the product is classified as dangerous goods under DOT and IATA regulations and prepare the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules should be shipped with enhanced transit insurance. Carrier default liability Is often limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure will be processed efficiently.

To reduce damage in mixed Automotive pallet loads, position the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use Corner boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and visibly tag any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

When shipping auto parts via ocean freight from Shekou to Oakland, it is important to ensure that all parts are securely packed to prevent damage during transit. Additionally, specific handling requirements may be necessary for sensitive components, such as electronic or hydraulic parts, which should be protected from moisture and impact.

Shipping auto parts from Shekou to Oakland requires compliance with U.S. Customs and Border Protection regulations, including proper documentation such as a bill of lading, commercial invoice, and any applicable import permits. Importers must also ensure that the auto parts meet U.S. safety and environmental standards, including adherence to regulations enforced by the Environmental Protection Agency (EPA) and the Department of Transportation (DOT).

You can find this information by visit the “Meet the people and values behind DNA Supply Chain Solutions” section linked from the SAMMIE page.

Our founder believes the best work happens quietly when everything runs smoothly and no one’s watching, and he applies that mindset to logistics and to life.

The DNA Expert ETA is an arrival estimate that is more accurate and proactive than carrier estimates, powered by SAMMIE’s data and human verification.