Shipping Vehicle Parts from Shunde to Atlanta via Ocean Freight

For moisture-sensitive Auto parts, choose inner Moisture-barrier bags around each component, then place them in Sturdy cartons with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Dry Storage Only”. For export or long-duration transit, evaluate adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You Can ship car tires with boxed Auto parts, but They should be physically separated and properly secured. Most carriers recommend palletizing boxed car parts and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive Automotive parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers can require Hazardous materials declarations, depending on the type and quantity of fluid. You should review whether the product is classified as dangerous goods under relevant transport regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules are typically shipped with Full-value cargo insurance. Carrier default liability Is often limited and may not cover the full replacement cost of specialized auto parts. Freight experts recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed Automotive pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and Tires above. Use Corner boards, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive vehicle parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

Required documentation includes a commercial invoice, packing list, bill of lading, and any necessary export permits from China. Additionally, import documentation such as an entry manifest and compliance with U.S. Customs and Border Protection regulations is essential for clearance in Atlanta.

Yes, auto parts must comply with U.S. regulations, including safety standards set by the National Highway Traffic Safety Administration (NHTSA) and any applicable Environmental Protection Agency (EPA) regulations. Importers should also be aware of tariffs and duties that may apply.

You can take the “One Test Run Challenge” by giving us a single shipment, which we use to demonstrate what visibility, reliability, and real partnership feel like, with a dedicated page available to get started.

SAMMIE is included with every ocean, air, land, and customs service at no extra cost.

We use SAMMIE’s AI-driven rate and route optimization to recommend optimal carriers and lanes based on current conditions and prices.