Shipping Car Parts from Shunde to Salvador via Ocean Freight

For moisture-sensitive car parts, Use inner sealed pouches around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, Consider adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You are allowed to ship Tires with boxed car parts, but they must be physically separated and properly secured. We recommend palletizing boxed auto components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled vehicle parts such as fuel system components, shock absorbers, or oil coolers May require special handling notes, depending on the type and quantity of fluid. Exporters should Check whether the product is classified as dangerous goods under IMDG and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value vehicle components such as engines, transmissions, ECUs, and safety modules Are best shipped with enhanced transit insurance. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized Automotive parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed vehicle components pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use angle boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

When shipping auto parts via ocean freight, it is essential to ensure proper packaging to protect against moisture and salt exposure during transit. Additionally, the parts should be securely packed to prevent movement and damage. Compliance with international shipping regulations and standards for hazardous materials, if applicable, is also necessary.

Auto parts imported into Brazil must comply with the country's import regulations, which include obtaining an Import License (LI) and adhering to the Brazilian customs requirements. Documentation such as a commercial invoice, packing list, and certificate of origin may be required. It's important to ensure all parts meet Brazilian safety and environmental standards.

Users say SAMMIE’s data as extremely accurate and reliable, especially compared to the inaccurate or outdated data they used before adopting the platform.

Yes, customers need an account. We walk you through onboarding to customize your experience and give you full access to the SAMMIE visibility platform.

Yes, our company is fully licensed, bonded, and compliant with U.S. and international freight regulations as a Freight Forwarder, with credentials including Freight Forwarder & NVOCC License 019344, USDOT 3458744, MC-1128283, FMC Bond 91385, and C-TPAT Certification 24009050.