Shipping Car Tires from Shunde to Santos via Ocean Freight

For moisture-sensitive automotive parts, choose inner sealed pouches around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Dry Storage Only”. For export or long-duration transit, Consider adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You may ship car tires with boxed car parts, but they must be physically separated and properly secured. We recommend palletizing boxed car parts and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive Automotive parts, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers can require special handling notes, depending on the type and quantity of fluid. Exporters should Check whether the product is classified as dangerous goods under relevant transport regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules are typically shipped with enhanced transit insurance. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized Automotive parts. Freight experts recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed auto parts pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use angle boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive vehicle parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

Required documentation typically includes a commercial invoice, packing list, bill of lading, and any necessary export permits from China, as well as import documentation required by Brazilian customs, such as the Declaração de Importação (DI) and import licenses for specific automotive parts.

Yes, automotive parts shipped from China to Brazil must comply with various regulations, including ANVISA and Inmetro certifications, which ensure that products meet safety and quality standards established by Brazilian authorities. Importers must also be registered with the Receita Federal and may need to provide proof of compliance with local regulations.

DNA offers warehousing and distribution with inventory management and reporting, B2B pick/pack and palletization, cross-docking, transloading, and partnered facilities in key logistics hubs.

Yes, DNA offers global shipment support for hardware, electronics, and high-value IT assets with secure handling.

Our SAMMIE platform offers AI-powered ETAs, “hot” shipment flagging, instant delay alerts, live map tracking for every container globally, and centralized, searchable storage for BOLs, invoices, and customs forms.